Inflatable shelter as exhibition tent

Inflatable structure, no lifting equipment, set up completely by human , moveable, prevent the aircraft without fixed airport.

Brief introduction

The Uniforce inflatable hangar used for all types of fighter planes, helicopters, civil aviation aircraft and all kinds of other aircrafts as the non-permanent shelter. It can be set up within 1~2 hours and without large lifting equipment. It provides the comprehensive and security indoor environment for aircrafts parking, inspection, maintenance etc., so that prevent damage from various bad climate for aircrafts.

Advanced and Advantage

 •  Alternatives to prefabricated hangars in airports, it can be set up and come into use at anytime and anywhere you need.

 •  Easy to set up and dismantle, without lifting equipment.

 •  No special requirement to set-up position.

 •  Advantages of main material: abrasion-proof, fire-proof, water-proof and light weight .

 •  Stable overpressure control, well-ventilating, strong anti-wind ability, wide temperature range.

 •  No special maintenance required.

Composing

 •  Module

 •  End door

 •  Middle door

 •  Air Pressure control system

 •  Air supply system

 •  Repair kit

 •  Transport boxes

Auxiliary equipments

 •  Transformer

 •  Distribution tubes

 •  Blower unit

 •  Alarm unit

 •  Pressure control system

 •  Monitoring tubes

 •  Inflatable hangar is equipped with transformer, air supply unit, air pressure control system to ensure normally operating. Especially air pressure control system, can maintain correct pressure inside the hangar, test the pressure and supply air automatically in case of power loss to the unit or too low pressure in the hangar.

Set-up procedur

•  Selection and preparation of the set-up area

•  Unpacking

•  Rolling out of the modules, air beams and canvases

•  Lacing of pre-installed slings between modules and end door can 

•  Air Pressure Control system and air supply equipments connecting

•  To inflate

•  Anchoring the hangar

We could supply various size of large-span inflatable Hangars depending on customer’s requirements!

Length: combined with several units

Width: up to 40m

Height: up to 18m

Technology Parameter 

	Items	Type: MKII 22
1	External dimension (L×W×H)	53m(with 2 end doors)×22.3m×9.7m
2	Internal dimension (L×W×H)	37m(if without 2 end doors)×18.8m×7.8m
3	Width at height of 2m	17.6m
4	Weight of Hangar	6100kgs
5	Total weight including equipment	7300kgs
6	Hangar components	7 modules + 2 middles doors + 2 end doors (Can be adjusted according to the demands)
7	Components weight	Each module: 700kg Each end door: 600kg
8	Transportation packing and dimension of individual box	10 boxes, 700-800kg each box 2m×1.45m×1.45m
9	Time for setting up	10 men in 2 hours
10	Blower quantity for setting up	4 sets
11	Air control	Air pressure control system operates in 2 hours interval, 2 sets air pressure control system
12	Mode to elevate the end door	Manual or mechanical
13	Suitable temperature	-30°C ~+70°C
14	Anti-wind ability	against 8 degree (25 m/s) wind speed
15	Snow load ability	around 100kg/m2 thickness of snow cover can be withstand
16	Years of continuous use	5 years
17	Storage life	10 years